home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Dr. Windows 3
/
dr win3.zip
/
dr win3
/
UTILITY1
/
IC.ZIP
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-11-15
|
10KB
|
266 lines
ImageCommander Readme.txt file
Subject Page
-------------------------------------
Shareware...........................1
ASP Ombudsman Policy................1
Limited Warranty....................2
Installing ImageCommander...........3
The User's Manual...................4
Technical Support...................4
Distributing........................5
Purchasing the Licensed Version.....5
Definition of Shareware
Shareware distribution gives users a chance to try software before buying it.
If you try a Shareware program and continue using it, you are required to
register it (or purchase the licensed version as in the case of
ImageCommander).
Copyright laws apply to both Shareware and retail software, and the
copyright holder retains all rights, with a few specific exceptions as stated
below. Shareware authors are accomplished programmers, just like retail
authors, and the programs are of comparable quality. (In both cases, there are
good programs and bad ones!) The main difference is in the method of
distribution. The author specifically grants the right to copy and distribute
the software, either to all and sundry or to a specific group. For example,
some authors require written permission before a commercial disk vendor may
copy their Shareware.
Shareware is a distribution method, not a type of software. You should find
software that suits your needs and pocketbook, whether it's retail or
Shareware. The Shareware system makes fitting your needs easier, because you
can try before you buy. And because the overhead is lower, prices are lower
also. Shareware has the ultimate money-back guarantee -- if you don't use the
product, you don't pay for it.
ASP Ombudsman Policy
This program is produced by a member of the Association of Shareware
Professionals (ASP). ASP wants to make sure that the shareware principle
works for you. If you are unable to resolve a shareware-related problem with
an ASP member by contacting the member directly, ASP may be able to help. The
ASP Ombudsman can help you resolve a dispute or problem with an ASP member,
but does not provide technical support for members' products. Please write to
the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442-9427 or send a
CompuServe message via CompuServe Mail to ASP Ombudsman 70007,3536
1
LIMITED WARRANTY AND DISCLAIMER OF WARRANTY
THIS SOFTWARE AND ACCOMPANYING WRITTEN MATERIALS (INCLUDING INSTRUCTIONS
FOR USE) ARE PROVIDES "AS IS" WITHOUT WARRANTY OF ANY KIND. FURTHER, JASC,
INC.(JASC) DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING
THE USE, OR THE RESULTS OF USE, OF THE SOFTWARE OR WRITTEN MATERIALS IN TERMS
OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE
RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. IF
THE SOFTWARE OR WRITTEN MATERIALS ARE DEFECTIVE YOU, AND NOT JASC OR ITS
DEALERS, DISTRIBUTORS, AGENTS, OR EMPLOYEES, ASSUME THE ENTIRE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.
THE ABOVE IS THE ONLY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, THAT IS MADE BY JASC, ON THIS JASC PRODUCT.
NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY JASC, ITS DEALERS,
DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY NOT RELY ON ANY SUCH
INFORMATION OR ADVICE. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.
NEITHER JASC NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION,
PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND
THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT EVEN IF
JASC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This Limited Warranty shall be governed and construed in accordance with
the laws of the State of Minnesota.
ACKNOWLEDGMENT
BY USING THE SHAREWARE VERSION OF IMAGECOMMANDER YOU ACKNOWLEDGE THAT YOU
HAVE READ THIS LIMITED WARRANTY, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS'
TERMS AND CONDITIONS. YOU ALSO AGREE THAT THE LIMITED WARRANTY IS THE
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN THE PARTIES AND
SUPERSEDE ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, AND ANY OTHER
COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF THE
LIMITED WARRANTY.
2
Installing ImageCommander
Before you can use ImageCommander you have to run the ImageCommander
setup program from Windows so it will work properly on your computer.
You cannot just copy the files from the ImageCommander disk to your hard
disk. The files on the distribution disk are packed in a special way to
save space. The setup program unpacks those files and builds them on
your working disk.
1. Make Windows' "Program Manager" the active window.
2. From Windows' "Program Manager", select "File", then
select "Run". This will open the "Run" dialog box.
Place a the ImageCommander disk in your floppy drive.
Type in the dialog box the command that will run the
ImageCommander setup program.
If your floppy disk goes in your Drive "A", type:
A:SETUP
If your floppy disk goes in your Drive "B", type:
B:SETUP
Leave the "Run Minimized" box un-selected, and click the
"OK" command button (or press "Enter").
3. After a brief moment you will be prompted by a dialog box
to enter the desired location for ImageCommander. This is
the location that you want your ImageCommander files to be
placed. It will suggest a drive and directory of "C:\PSP".
If you want the ImageCommander program files installed on a
different drive or directory, just click the pointer to the
right of the characters you want to change, backspace over
the ones you want to erase, then type in the new designation.
4. ImageCommander Setup will unpack the necessary files and
place them into your directory. The status of the operation
will be displayed as the setup program does this work. If
ImageCommander came on more than one disk, during the
unpacking of the disks you will be requested to insert the
next disk.
5. You will be asked if you would like to add ImageCommander
to the program manager.
Select "No" if you do not want ImageCommander added
to your program manager.
Select "Yes" to have the setup program automatically
build a ImageCommander icon and add it to your program
manager.
6. The setup program will notify you when the installation is
complete.
3
The User's Manual
In order to keep the size of the Shareware version of ImageCommander
reasonable no user's manual is provided. You will find that ALL menu items
and associated dialog boxes, along with general information, is provided on
line using the HELP-INDEX menu option of the program.
When you purchase the licensed version of ImageCommander you will receive the
fully illustrated, perfect bound User's Guide.
ImageCommander Technical Support
Technical support for ImageCommander can be obtained from:
USA
---
JASC, Inc.
10901 Red Circle Drive
Suite 340
Minnetonka, M